LMU-2630LNB™
LTE CAT 1 bis smart tracker for commercial fleets and assets
The LMU-2630 series combines regional LTE CAT 1 bis connectivity, Bluetooth Low Energy 4.2, and capable I/O for commercial fleets and asset tracking. CalAmp PEG intelligent logic programming and wired and wireless sensor integration support real-time telematics, driver monitoring, and cargo visibility.
- Regional LTE CAT 1 bis connectivity
- Bluetooth Low Energy 4.2 supports wireless peripherals
- Wired, OBDII, and cigarette-lighter power harness options
- Gateway and tag integration supports cargo monitoring
- Driver-behavior and harsh-event monitoring
- CalAmp PEG logic enables intelligent edge processing
Product specifications
| Physical Design | |
|---|---|
| Dimensions | 94 × 53 × 20 mm (3.70 × 2.09 × 0.79 in) |
| Weight | 80 g (2.8 oz) |
| Cellular | |
|---|---|
| LTE Cat-1 bis Bands | B2, B4, B5, B12*, B13, B14, B17, B25*, B66* |
| Cellular Data Support | SMS, UDP Packet Data, TCP |
| GNSS | |
|---|---|
| GNSS Constellations | GPS, GLONASS, Galileo, BeiDou |
| Tracking Sensitivity | -167 dBm |
| Acquisition Sensitivity | -148 dBm (cold start) -159 dBm (hot start) |
| Location Accuracy | ~1.5m CEP Open Sky (SBAS 24 hours static) |
| Location Update Rate | 4 Hz |
| Wireless Interfaces | |
|---|---|
| Bluetooth | BLE 4.2 |
| Vehicle & Interfaces | |
|---|---|
| Serial Interface | TTL |
| Antennas & SIM | |
|---|---|
| Cellular Antenna | Internal |
| GPS / GNSS Antenna | Internal |
| SIM Access | Internal (2FF SIM) |
| Power | |
|---|---|
| Operating Voltage | 12/24 VDC Vehicle Systems 9-30 VDC (start-up, operating) 7-32 VDC (momentary) |
| Power Consumption | Typical <400uA @ 12V (low power sleep) Typical <4mA @ 12V (sleep) Typical 25mA @ 12V (radio-active sleep) Typical 50mA @ 12V (GPS tracking and cell idle) |
| Battery Capacity | Up to 1000 mAh |
| Battery Chemistry | Lithium-ion (Li-ion) |
| Charging Temperature | 0° to +45° C |
| Environmental | |
|---|---|
| Operating and Storage Temperature | -30° to +60° C (connected to primary power) -10° to +60° C (operating on internal battery) -20° to +25° C ≤ 6 months (long term storage with battery) |
| Humidity | 85% RH @ 50° C non-condensing |
| Shock and Vibration | MIL-STD-202G, MIL-STD-810F, SAE J1455 |
| Electrostatic Discharge | IEC 61000-4-2, 4 kV |
| Ingress Protection Rating (IP) | IP41 in-cab use |
| Sensors | |
|---|---|
| Motion Sensor | 3-axis accelerometer |
| I/O | |
|---|---|
| Primary Device Connector | 20-Pin 3mm Pitch |
| Ignition Inputs | 1 fixed bias |
| Digital Inputs | 4 (high/low bias selectable 0-32 VDC) |
| Digital Outputs | 3 (open collector relay 150mA) |
| Analog Inputs | 1 (external ADC input 0-32 VDC) |
| Serial Interface | 2 TTL ports |
| DC Power Outputs | 1 (switched 3.3V) |
| 1-Wire Interface | 1 (driver ID/temperature sense) |
| Status LEDs | 2 (GPS and Cellular) |
| Edge Intelligence | |
|---|---|
| Firmware | 32-Bit |
| Edge Programming | PEG |
| Software Services | |
|---|---|
| Device Management | Manage, configure, and deploy OTA software updates to connected assets at scale |
| CalAmp Telematics Cloud | Stream telematics data into proprietary systems with flexible API integration |
| CalAmp Application | Fleet and asset management software for tracking, monitoring, and managing vehicles, equipment, drivers, assets, and cargo. |
| Certifications | |
|---|---|
| Certifications | FCC, CE, IC, PTCRB, RoHS |
| Accessories | |
|---|---|
| Accessories | 5C260 : 6 feet, 20-pin to 1-Bit Bus (2-pin), Switch/LED (4-pin), Buzzer (3-pin), Aux-1 5-pin Serial, Aux-2 5-pin Serial and 3-wire Power Harness with Fuse |
| 5C250 : 6 feet 4 inches, 20-pin to 1-Bit Bus (2-pin), Switch/LED (4-pin), Buzzer (3-pin) and 3-wire Power Harness with Fuse | |
| 5C737 : 1 meter, CABLE, 6 WIRE (RED,BLK,WHT,WHT/BLUE,BLU,GRN) | |
| 5C848-8: 8 feet, 20-pin to 3-wire Power Harness with Fuse | |
| 5C849-8: 8 feet, 20-pin to 3-wire Power Harness Non-Fused | |
| 5C854 : 6 feet 20-pin Power Relay Harness with limited I/O, Fuse and Standalone Relay for Starter Kill | |
| 5C862 : 18 inches Power Starter Disable Kit to be used with any 20-pin Cable Harness | |
| 5C864 : 6 feet, 20-pin to OBDII Power Harness with Fuse and limited I/O | |
| 5C867 : 8 feet , 20-pin to 12-wire Power Harness with Fuse | |
| 5C874 : 3 feet, 20-pin to 8-wire Power Harness Non-Fused | |
| 5C875 : 1 foot, 3-wire Starter Disable Kit | |
| 5C896 : 2 feet, OBDII to 2-wire Power harness, splice power only from OBDII | |
| 5C908: 8 feet, 20-pin to 20-wire Power Harness with Fuse, Aux-1 5-pin Serial, Aux-2 5-pin Serial | |
| 5C938 : 5 feet, 20-pin to Cigarette Lighter Power Harness | |
| 134364-SER: 3 feet, DB9 Female (DCE) to 5-pin Universal Serial Programming Cable | |
| 134364-MDT5: 1 foot , 5-pin to DB9 Male (DTE) Serial Adapter with Switched Power and Selectable Voltage (5V default) | |
| 134364-MDT12: 1 foot, 5-pin to DB9 Male (DTE) Serial Adapter with Switched Power and Selectable Voltage (12V default) | |
