TTU-2900MB™
LTE CAT M1, Solar-Tracker
Weatherproof Solar Powered Asset Tracker for Extreme Environments
CalAmp Telematics Cloud
Connect remote assets to a diverse set of vertical applications and third-party services to scale your fleet and power data-driven operations.
Powerful Applications
Visualize the data you need and extract maximum value while minimizing your costs. Put intelligent analytics and custom reporting at your fingertips via a single-view, user-friendly interface.
Comprehensive Asset Visibility
Safe • Secure • Efficient
Solar Regenerative Telematics
- High-capacity solar panel
- High-capacity battery for operation in extended low-light conditions
Rich Connectivity for Sensor Integration
- Bluetooth 5.0 for short-range wireless connectivity
- CAN bus for Trailer CAN, & sensor hubs
- Analog/Digital/Serial Inputs/Outputs for wired connections
LTE Cat-M + 2G Cellular Connectivity
- Deployable world-wide
- Future proofed for 5G (included in mMTC 3GPP Rel. 16)
Ruggedized
- IP-67 rated with stellar shock & vibration performance
| Cellular/Network | |
|---|---|
| Global Variant | |
| LTE CAT-M1 |
2100 (B1)/1900 (B2)/1800 (B3)AWS 1700 (B4)/850 (B5/B26)/900 (B8)/700 (B12/B13/B28)/800 (B18/B19/B20)/1900 (B39/B25) MHz |
| GSM/GPRS |
850/900/1800/1900 MHz |
| Data Support | |
|---|---|
| SMS, UDP, TCP, CalAmp Telematics Cloud API |
| Satellite Location (GNSS) | |
|---|---|
| Constellation Support |
GPS/GLONASS/BeiDou/Galileo/QZSS |
| Tracking Sensitivity |
-157 dBm |
| Acquisition Sensitivity |
-157 dBm (hot start) -146 dBm (cold start) |
| Location Accuracy |
<2.5m CEP Open Sky |
| Location Update Rate |
Up to 5 Hz |
| Comprehensive I/O | |
|---|---|
| Ignition Inputs |
1 fixed bias |
| Digital Inputs |
3 (high/low bias selectable 0-30 VDC) |
| Digital Outputs |
2 (open collector relay 150mA) |
| Analog Inputs |
2 external ADC inputs |
| 1-Wire® Interface |
1 (driver ID/temperature sense) |
| DC Power Outputs |
1 switched VCC_SYS (3.5V – 4.2V), 1 switched 3.3V |
| Accelerometer |
Built in, triple-axis (driver behavior, impact detection, motion sensing, tilt detection) |
| Button/LED |
1 (Multi-function Push Button Switch w/LED indicator) |
| Serial Interface |
1 TTL Port, 1 RS-232 Port |
| Certifications | |
|---|---|
| Industry Certifications |
FCC, IC, PTCRB, RoHS |
| Cloud/Software Services¹ | |
|---|---|
| CalAmp Telematics Cloud |
Device data stream via RESTful APIs |
| CalAmp iOn |
Fleet management software |
| Accessories |
Mounting tabs built-in for easy install |
| Edge Intelligence¹ | |
|---|---|
| PEG™ |
Update device functionality or develop new on the edge applications |
| Electrical | |
|---|---|
| Operating Voltage |
12/24 VDC Vehicle Systems 9-30 VDC (start-up, operating) 7-32 VDC (momentary) |
| Battery Technology |
6W @ 12.5V |
| Power Consumption |
Typical 400uA @ 12V (deep sleep) Typical 15mA @ 12V (radio-active sleep) Typical 60mA @ 12V (active tracking with GPS and cell enabled) |
| Battery Pack | |
|---|---|
| Battery Capacity |
6.2 Ah |
| Battery Technology |
Lithium-Ion |
| Charging Temperature |
-10° to +50° C |
| Environmental | |
|---|---|
| Temperature |
-30° to +60° C (connected to primary power) -20° to +60° C (operating on internal battery) -30° to +45° C ≤ 6 months (long term storage with battery) |
| Humidity |
75% RH @ 50° C non-condensing |
| Shock and Vibration |
U.S. Military Standards 202G, SAEJ1455 |
| ESD |
IEC 61000-4-2 (4KV test) |
| Ingress Protection Rating+ |
IP67 |
| Physical/Design | |
|---|---|
| Dimensions |
18.2” x 5” x 1.9” 463 mm x 128 mm x 48 mm |
| Weight |
38 oz. (1084 g) (w/ 6 Ah Battery) |
| Connectors/SIM Access | |
|---|---|
| Power, I/O |
1x 12-Pin round connector, 1x 14-Pin round connector |
| SIM Access |
External (4FF) |
| Interface Standards | |
|---|---|
| Bluetooth |
Bluetooth Low Energy (BLE) |
| VBUS Truck Data |
CAN ( J1939), TrailerCAN |
| Wireless Interfaces | |
|---|---|
| GPS Antenna |
Internal |
| Cellular Antenna |
Internal |
| BLE Antenna |
Internal |