The CalAmp line of integrated dipole downconverters incorporates a proprietary "low loss dipole" and a high performance low noise downconverter.
| Specifications |
| LO Frequency | 2278 MHz ± 15 KHz |
| IF Output Frequency | 222-408 MHz |
| RF Input Frequency | 2500-2686 MHz |
| Gain (Converter) | 30 dB ± 3 dB |
| LO Frequency Stability | ± 30 KHz (-40°C to 65°C); ± 50 KHz Max. |
| Gain Flatness | ± 3.0 dB, ± 0.5 dB/6 MHz |
| Noise Figure (Converter) | 1.7dB |
| Phase Noise | -93 dBc/Hz @ 10 KHz |
| PCS Rejection (1930-1990 MHz) | 90 dB (40 dB is pre-LNA) |
| IF Rejection | -80 dBc |
| IMD | -50 dBc |
| Third Order Intercept Point | 24 dBm |
| Output Level (Max) with 31 channels each | 35 dBmV |
| Output Connector | F Type Female, 75 Ohms |
| Supply Voltage | +16 to +24 VDC (through output connector) |
| Current | 235 mA |
| Operating Temperature | -40° C to +65° C |
| Finish | Chem. Film Conversion, MIL-C-5541, Class 3, Clear |
| Physical Size | 3.0 x 4.0 x 11.6 in (76x102x300mm) |
| Physical Weight | 9.5 oz (260 grams) |
| Antenna Specifications - with 24 dBi Reflector (p/n 130094) |
| Gain | 24 dBi |
| Front to Back Ratio over back hemisphere | 21 dB Min.; 28 dB Min. @ 180° |
| Side Lobe Level | 20 dB ± 3 dB |
| 3-dB Beam Width | 9.75° |
| Cross Polarization Rejection | 28 dB |
