Technical Support Application Notes

Dataradio SCADA & Telemetry products are used with a variety of RTU/PLCs. This section contains documented interfaces for many of these hardware providers. You will also find other useful information about Dataradio product usage.

If you do not see the RTU or PLC you are using listed, or would like to see yours included, contact our technical services department at This e-mail address is being protected from spam bots, you need JavaScript enabled to view it

	TSAN 001: RS-232 RTS/CTS Handshake Control when DOX (Data Activation Transmission) is not available using DCI Technologies Inc. Micro-CAPP RTS (MC-RTS-01).
	TSAN 002: An aid estimating your RF path
	TSAN 003: Datradio RNet-JSLM and Dataradio DL-3282 Bell 103, Bell 202 Modem Configuration.
	TSAN 004: Typical Power Supply Specification for Dataradio COR Ltd. SCADA & Telemetry products.
	TSAN 005: Interface information for Zetron 1732 RTU with Modbus and Dataradio Integra.
	TSAN 006: Information to configure a Dataradio DL-3400 Series and Dataradio DL-3282 Bell 202, Bell 103 FSK Modem.
	TSAN 008: Interface information for Saitel RTU #8616R and Dataradio Integra.
	TSAN 009: Interface Information for Telemecanique Modicon Series TSX Micro to Dataradio T-Base Base Station.
	TSAN 010: Interface for Dataradio Integra to a third party modem as a system extension feature.
	TSAN 011: Display user data in the Dataradio Field Programming Software using a data tap.
	TSAN 012: Interface Information for Sofrel S50 PLC and Dataradio Integra.
	TSAN 013: Using dial-up modems to access system diagnostics for Dataradio Integra.
	TSAN 014: Interface Information for Allen Bradley SLC 5/0X to Dataradio Integra-TR.
	TSAN 015: Interface Information for Allen Bradley SLC 5/0X to Dataradio Integra-H.
	TSAN 016: Interface Information for Allen Bradley SLC 5/0X to Dataradio T-96SR.
	TSAN 017: Interface Information for Control Microsystems Telesafe RTU to Dataradio Integra and T-96SR.
	TSAN 018: Interface Information for GE Fanuc Series 90 PLC's to Dataradio Integra.
	TSAN 019: Interface Information for Allen Bradley MicroLogix to Dataradio Integra-TR.
	TSAN 020: Interface Information for Allen Bradley MicroLogix to Dataradio Integra-H.
	TSAN 021: Interface Information for Allen Bradley MicroLogix to Dataradio T-96SR.
	TSAN 022: Interface Information for ABB Advant Controller 110 to Dataradio Integra-TR.
	TSAN 023: Serial Port Replication using Black Box Corporation port replication for multiple serial devices sharing One (1) Dataradio Integra.
	TSAN 024: Serial Port Replication using Telebyte Port Miser port replication for multiple serial devices sharing One (1) Dataradio Integra.
	TSAN 025: Interface for Group Schneider Quantum and Momentum PLCs and Dataradio Integra Wireless Modems.
	TSAN 026: Interface Information for D2-250 PLC-Automation Direct to Dataradio Integra Wireless Modems.
	TSAN 027: Interface Information for Automation Direct DC-450 PLC to Dataradio Integra Wireless Modems.
	TSAN 028: Interface Dataradio Integra wireless modems to an RS-485 4-wire connection.
	TSAN 029: USB to serial adapter use for programming and communicating with Dataradio products.
	TSAN 030: Interface Information for Control Microsystems SCADAPack PLC to Dataradio T-96SR.
	TSAN 031: Interface Information for Control Microsystems SCADAPack PLC to Dataradio Integra Wireless Modems.
	TSAN 032: Configure the Integra-TR and Integra-H wireless modems for a Bell 202 compliant application or a Dataradio DL-3400.
	TSAN 033: The SIXNET IO Tool Kit can successfully Poll I/O, Load configurations, and access Datalog files from the SixTRAK and VersaTRAK IPm via radio frequencies using Dataradio Integra-H Wireless Modems.
	TSAN 035: Installation Instructions and Interface Information for Dataradio’s T-96SR Integrated Wireless Modems and MOSCAD/MOSCAD-L RTU’s.
	TSAN 036: End to End link testing for Dataradio wireless radio modems.
	TSAN 037: Configure an ethernet network using back-to-back HiPR-900’s as a serial data repeater configured in bridge mode.
	TSAN 038: Configure an ethernet network using back-to-back HiPR-900’s as a TCP/IP bridge repeater configured in bridge mode.
	TSAN 039: Configure an ethernet network using back-to-back HiPR-900’s as a serial data repeater configured in router mode.
	TSAN 040: Configure an ethernet network using back-to-back HiPR-900’s as a TCP/IP bridge repeater configured in router mode.
	TSAN 041: Modem to Modem testing of the DL3282 Modem.
	TSAN 042: Wiring interface for T-96SR to the ABB AC800C controller.
	TSAN 043: A site survey utility for Integra-TR or Integra-H wireless modems.
	TSAN 044: Store and forward with the HiPR-900.
	TSAN 045: Locate a radio that is "stuck in transmit".
	TSAN 046: Allen Bradley device adds Ethernet connectivity to a serial port on a Micrologix PLC.
	TSAN 047: Network Protocol Analyzer for a HiPR-900 or Integra-IP Ethernet connection.
	TSAN 048: T-96SR - Determine if “Dynamic Carrier Detect Off Threshold” should be enabled or disabled.".
	TSAN 049: HiPR Peer-to-Peer communication - Provides the information necessary to implement peer to peer communication.
	TSAN 050: Serial Communications - Provides information about various implementations of RS-232 serial communications using control lines.
	TSAN 051: Site/Path Testing for the T-96SR or T-Base - Provides the information to conduct a site/path study for communications with a T-96SR or T-Base.
	TSAN 052: HiPR-900 Serial Diagnostics Backhaul - Provides a method to backhaul serial diagnostics from Master sync radio to designated remote HiPR-900 in router mode.
	TSAN 053: Integra-H DF1 Radiomodem - Provide interface information necessary for the configuration of the Integra-H wireless modem to a Rockwell Allen Bradley SLC 5/0X PLC using the Rockwell Radio Modem protocol.
	TSAN 054: Integra-TR DF1 Radiomodem - Provide interface information necessary for the configuration of the Integra-TR wireless modem to a Rockwell Allen Bradley SLC 5/0X PLC using the Rockwell Radio Modem protocol.
	TSAN 055: HiPR-900® Site Survey - Provide information to perform a site survey using the HiPR-900.
	TSAN 056: Integra-TR to Bristol Babcock ControlWave PLC - Provide interface information to configure the Integra-TR wireless modem to a Bristol Babcock ControlWave PLC.
	TSAN 057: Integra-TR to Coyote DataCom RIO-15 - Provide interface information necessary to configure the Integra-TR wireless modem to a Coyote DataCom RIO-15.
	TSAN 058: T-96SR to DataComm for Business (DCB) SE 6600 - Provide the interface for connecting a T-96SR to a DataComm for Business (DCB) SE 6600 serial encryption device.
	TSAN 059: Integra-H to DataCom for Business (DCB) SE 6600 - Provide the interface for connecting an Integra-H to a DataComm for Business (DCB) SE 6600 serial encryption device.
	TSAN 060: Integra-TR to DataCom for Business (DCB) SE 6600 - Provide the interface for connecting an Integra-TR to a DataComm for Business (DCB) SE 6600 serial encryption device.
	TSAN 061: Integra-IP Quickstart - Provide a procedure for programming the Integra-IP properties (via the Integra-IP dat files) into the Master/Server Integra-IP and two Clients/Remotes illustrated in the Integra-IP Quick Start Guide.
	TSAN 062: T-96SR DE-15 cable connection: Wiring instructions for the T-96SR DE-15 cable connection to the standard DB25 serial connection used on a Rockwell Automation AB PLC 5 logic controller.
	TSAN 063: Integra-H ‘Back to Back’ Repeater or Integra-TR system extension: Data systems utilizing Integra-H or Integra-TR wireless modems occasionally require the addition of a remote site in a location that does not have a reliable RF link to the ‘Master’ radio. Often times, the site of the repeater or system extension will have a PLC or RTU in place, and keeping this installation in place is necessary. In such cases adding an Integra-H repeater in a ‘Back to Back’ configuration, or adding an Integra-H link to an Integra-TR system, can provide the answer.